125kHz RFID PVC Self-Adhesive Writable Sticker Tag - 40mm DiameterA thin, round self-adhesive RFID sticker tag operating at 125kHz frequency, built on a T5577 / T5200 writable chip. The tag is encased in a flexible PVC disc with an anti-interference material layer, making it suitable for direct application onto metal-adjacent surfaces and a wide range of substrates. The adhesive backing allows permanent or semi-permanent mounting onto access control readers, elevator panels, attendance terminals, and asset surfaces.Key Specifications Chip Model: T5577 / T5200 Operating Frequency: 125kHz (LF RFID) Read / Write: Writable (rewritable) Form Factor: Round disc sticker Diameter: 40mm Thickness: 0.58mm Material: PVC with anti-interference layer Mounting: Self-adhesive backing Memory: T5577 - 363 bits user memory, 8 pages of 4 bytes (standard configuration) Data Retention: Up to 10 years (typical for T5577) Write Endurance: Up to 100,000 write cycles (typical for T5577) Chip Compatibility T5577 / T5200 writable 125kHz RFID chip Compatible with EM4100, HID, and other 125kHz read formats when programmed accordingly Readable and writable by standard 125kHz RFID readers and writers Compatible with Proxmark, ACM, and other 125kHz programming devices Scope of Application Access control systems - door entry, gate control Elevator floor access control Employee and visitor attendance tracking Asset labeling and inventory identification Time and attendance terminals Parking access and vehicle identification Library and document tracking Equipment and tool tracking Physical Properties Shape: Round / circular disc Diameter: 40mm Thickness: 0.58mm Body Material: PVC (Polyvinyl Chloride) Anti-interference Layer: Yes - reduces signal interference from nearby metal surfaces Adhesive: Pressure-sensitive self-adhesive backing Flexibility: Semi-flexible PVC construction What Is a 125kHz Writable RFID Tag?A 125kHz RFID tag is a low-frequency (LF) radio frequency identification device that communicates with a compatible reader at 125 kilohertz. The T5577 and T5200 chips used in this tag are writable, meaning the stored data (such as a unique ID number) can be programmed and reprogrammed using a compatible 125kHz RFID writer. This makes the tag suitable for cloning, custom ID assignment, and reconfiguration for different access control systems. The 125kHz frequency is widely used in legacy and current access control, attendance, and identification systems worldwide.Package ContentsRFID 125kHz PVC Self-Adhesive Writable Sticker Tags (quantity as selected)

Read more less

Rubik Aluminum Key Cabinet - 24 Key Capacity, Wall MountedThe Rubik 24-key aluminum wall mounted key cabinet is a compact lockable unit for small-scale key management. With two rows of 6 numbered hooks per panel, it provides a clear, organized layout for households, small offices, and reception areas where a limited number of keys need to be stored and tracked.Specifications Key capacity: 24 keys Hook layout: 2 rows x 6 hooks per panel Body material: Aluminum alloy with ribbed panel finish Lock type: Key lock with ring pull handle Mounting: Wall mounted via screws and wall plugs (included) Interior: Numbered hook strips for sequential key assignment What's Included 1 x Aluminum key cabinet 24 x Oval plastic key tags with writable labels and split rings Mounting screws with wall plugs 2 x Cabinet keys Interior LayoutThe interior features two rows of numbered hooks clearly labeled 1 through 6 per row. Each position is fixed and numbered, making it straightforward to assign, locate, and return keys consistently. The included oval key tags attach directly to key rings for immediate use.Locking and SecurityThe door is secured with a cylinder key lock. Access is restricted to authorized personnel only. Two keys are supplied with each unit. The aluminum construction resists bending and tampering under normal conditions.InstallationMount to any standard wall surface using the pre-drilled holes on the back panel. The included screws and wall plugs are suitable for concrete and masonry walls. Screw mounting creates stronger joints than adhesive or hook-based alternatives.Suitable For Residential homes - household and spare key storage Small offices - staff or visitor key control Retail stores - back office key management Small guesthouses or B&Bs - room key storage Workshops - equipment or locker key control

Read more less

Rubik Aluminum Key Cabinet - 32 Key Capacity, Wall MountedThe Rubik 32-key aluminum wall mounted key cabinet is a compact, lockable key storage unit for small offices, reception areas, and residential use. Its slim profile and aluminum construction make it suitable for locations where space is limited but key security is still required.Specifications Key capacity: 32 keys Body material: Aluminum alloy with ribbed panel finish Lock type: Key lock with ring pull handle Mounting: Wall mounted via screws and wall plugs (included) Interior: Numbered key hook strips for sequential key assignment What's Included 1 x Aluminum key cabinet 32 x Plastic key tags with writable labels and split rings Mounting screws with wall plugs 2 x Cabinet keys Interior LayoutThe interior features numbered hook strips. Each hook position corresponds to a numbered label on the key tag, allowing keys to be assigned, tracked, and returned to a consistent position. Suitable for small teams or single-floor key management.Locking and SecurityThe door is secured with a cylinder key lock. Access is restricted to authorized personnel only. Two keys are supplied with each unit. The aluminum construction resists bending and tampering under normal conditions.InstallationMount to any standard wall surface using the pre-drilled holes on the back panel. The included screws and wall plugs are suitable for concrete and masonry walls. Screw mounting creates stronger joints than adhesive or hook-based alternatives.Suitable For Small offices and reception desks - department or visitor key control Residential homes - household key organization Retail stores - staff key management Small hotels or guesthouses - limited room key storage Workshops and garages - equipment or vehicle key control

Read more less

Rubik Aluminum Key Cabinet - Wall MountedThe Rubik aluminum key cabinet is a wall mounted key safe box designed for systematic key storage and access control. Built with a ribbed aluminum body and a key-lock door, it provides a fixed, secure location for managing large numbers of keys in one place.Specifications Dimensions: 78 cm (H) x 51 cm (W) x 5.5 cm (D) Key capacity: 160 keys Body material: Aluminum alloy with ribbed panel finish Lock type: Key lock with ring pull handle Mounting: Wall mounted via 4 screws and wall plugs (included) Interior: Numbered key hook strips arranged in rows for sequential key assignment What's Included 1 x Aluminum key cabinet 160 x Plastic key tags with writable labels and split rings 4 x Mounting screws with wall plugs 2 x Cabinet keys Interior LayoutThe interior features multiple rows of numbered hook strips. Each hook position corresponds to a numbered label on the key tag, allowing keys to be assigned, tracked, and returned to a consistent position. The numbered system supports key registers and log sheets for accountability.Locking and SecurityThe door is secured with a cylinder key lock. The lock restricts access to authorized personnel only. Two keys are supplied with each unit. The aluminum construction resists bending and tampering under normal conditions.InstallationMount to any standard wall surface using the 4 pre-drilled holes on the back panel. The included screws and wall plugs are suitable for concrete and masonry walls. A wall mounting template is marked on the back of the cabinet for accurate hole placement.Suitable For Hotels and serviced apartments - room key management Offices and corporate facilities - department key control Residential buildings - unit and common area keys Car dealerships and fleet operators - vehicle key storage Property management companies - multi-property key organization Schools and institutions - staff key control

Read more less

Rubik Baby Feeding High Chair  The Rubik Baby Feeding High Chair combines solid wood durability with practical features like adjustable height, foldable design, and a full safety harness - perfect for growing families. Solid Wood Construction: Built from durable, solid wood that is sturdy, long-lasting, and easy to wipe clean after every meal. Height-Adjustable: Adjusts to 56cm and the tray to 78cm from the floor for comfortable feeding at any stage. Foldable and Portable: Folds flat in seconds for effortless storage or travel, making it ideal for families, restaurants, hotels, cafes.etc Safety Features: Includes a U-shaped guardrail to prevent slipping, an adjustable safety harness strap, and a wide 4-point stable base tested for tilt and load resistance. Soft Seat Cushion: Comes with a padded cushion for extra comfort, keeping your baby cosy and relaxed throughout every mealtime.  

Read more less